貴陽交通劃線市政道路劃線該怎么做?

貴陽交通劃線市政道路劃線該怎么做?

不知你是否知道市政道路劃線標的分類特點，貴陽交通劃線南方鴻宇的小編為大家介紹市政道路劃線的相關知識，對你了解道路劃線絕對有益。

I do not know if you know the classification characteristics of the city road marking standard, Guiyang traffic line south Hongyu small editor for everyone to introduce the relevant knowledge of the road line of municipal road, it is absolutely beneficial to you to understand the road line.

道路交通標線即稱道路標線，是指在道路的路面上用線條、箭頭、文字、立面標記、突起路標和輪廓標等向交通參與者傳遞引導、限制、警告等交通信息的標識。其作用是管制和引導交通，可以與標志配合使用，也可單獨使用。道路標線分為：熱熔標線，常溫冷漆標線，彩色防滑標線，振蕩防滑反光標線和預成型標線。 熱熔標線是目前我國道路標線上應用Z廣的一種標線。他施工時間短，耐磨性高，造價低。市政道路劃線應該以熱熔標線為主。

Road traffic marking, called road marking, refers to the identification of traffic information, such as lines, arrows, words, elevation marks, protuberance signposts and outline marks on the road road to traffic information, such as guidance, limitation and warning. Its role is to control and guide traffic, can be used with signs, also can be used alone. Road markings are divided into hot-melt marking, ambient temperature cold lacquer marking, color anti-skid marking, oscillating antiskid reflective marking and preformed marking. Hot melt marking is the most widely used marking system in China's road markings. His construction time is short, the wear resistance is high, and the cost is low. The city road line should be dominated by hot-melt marking.

道路交通標線主要劃設于道路表面，經受日曬雨淋，風雪冰凍，遭受車輛的沖擊磨耗，因此對其性能有嚴格的要求。首先要求干燥時間短，操作簡單，以減少交通干擾;其次要求反射能力強，色彩鮮明，反光度強，使白天、夜晚都有良好的能見度;第三，應具有抗滑性和耐磨性，以保證行車安全和使用壽命。

The road traffic marking line is mainly located on the road surface, weathered by the sun and rain, the wind and snow is frozen, and the vehicle is subjected to impact abrasion, so it has strict requirements for its performance. First, the drying time is short, the operation is simple, and the traffic interference is reduced. Secondly, the reflection ability is strong, the color is bright, the reflective light is strong, and the visibility is good during the day and night. Third, the anti skid and wear resistance should be of anti skid and wear resistance, so as to ensure the safety and service life of the driving.

道路劃線、廠區道路劃線、工廠停車場、地下車庫劃線、學校道路劃線、生活小區劃線等施工工程,分為冷漆劃線和熱熔劃線兩種.

Road line, plant area road line, factory parking lot, underground garage line, school road line, life plot line and other construction projects, divided into two kinds of cold paint line and hot melt line.

采用特種道路專用冷涂料，人工噴涂、厚度均勻、色澤清晰。包括停車位、禁停黃線區、通道線、導流帶、導向箭頭等。

Special cold coating for special roads is used, with manual spraying, uniform thickness and clear color. They include parking spaces, forbidden yellow line areas, channel lines, diversion belts, and guided arrows.